|
The new AQ-TS6.5 component set delivers high-end sound quality at a break though
price point. Our factory direct to the customer sales model lets us take
advantage of distribution efficiency to load these sets with state of the art
features rivaling sets at 4-8 times the price.
We start with focusing machining costs to the inside of the magnet gap to
build a high flux, low distortion motor. An aluminum voice coil former with
high temperature wire moves heat build up away from the coil. A 5 roll flat
spider keeps the coil aligned and linear.
The cone is a pressed paper and linen composite with a
water resistant acoustic treatment applied to the face. The cone and
treatment extend the frequency range and heighten articulation of the upper
midrange. The surround is a light rubber for controlled edge termination
while keeping sensitivity high.
The tweeter is a 25mm silk dome with an aluminum shorting ring, double
magnet, low distortion motor design. The cavity back rear chamber lowers
the working bandwidth of the tweeter to enhance midrange timbre. The copper
clad aluminum voice coil wire lowers the moving mass and extends the upper
frequency range to over 30kHz.
The 2nd order crossover features metalized poly tweeter capacitor with
aircore coil. The tweeter is adjustable via dip switch position at 0db,
-2dB and -4dB settings.
The AQ-TS6.5 component set is a serious audiophile quality driver set
perfect for making the sound quality upgrade every car needs but at a price
easily accommodated by any budget.
Peak Power Handling: 200 watts Per ch.
Woofer: 6.5”
Frequency Response: 30hz – 25khz
Tweeter: 25mm Silk Dome
4khz 12dB Octive Slope
Woofer:
Mounting Depth: 2.37"
Cut Out: 5.71"
OD: 6.5"
Tweeter:
Mounting Depth: 1.28"
Cut Out: 2.20"
OD: 2.74" |
